Rails Hardware – TRUCKBOSS Decks

Weather Proofing Kit 8′ Deck

TruckBoss — Thu, 22 Apr 2021 15:36:59 +0000

This package includes everything you need to replace the weatherproofing on your rails. It is necessary to do so if the old ones are worn out to ensure a proper seal and reduce vibrations. This will work on all sizes of TRUCKBOSS rails. [...]

Weather Proofing Kit 7′ Deck

iradmin — Mon, 26 Oct 2020 16:34:31 +0000

Wiring Harness (truck)

iradmin — Wed, 12 May 2021 20:06:18 +0000

This is the wiring harness that runs inside the drivers side rail. It supplies power from rear drivers side tail light to front of TruckBoss Deck. [...]

Replacement Rail Capture Hold Down Clamp Bolts & HW (6)

iradmin — Fri, 23 Oct 2020 19:57:14 +0000

This package includes (6x) bolts and hardware, which is sufficient to replace the hardware on (2x) Rail Capture Hold Down Clamps. On each TRUCKBOSS 6’/7’ deck there are (12x) bolts for the whole deck. On a TRUCKBOSS 8’ deck there are (16x) bolts for the whole deck. These bolts are installed into the clamps, and installed onto the deck in step 1.4. [...]

Replacement Plastic Rail-End Caps (2)

iradmin — Fri, 23 Oct 2020 19:34:53 +0000

The Plastic Rail End Caps sit on the end of the Rails, to close off and protect the inside of the Rails. This package includes (2x) Plastic Rail End-Caps, which is enough for a whole deck. Rail End-Caps are universal across all TRUCKBOSS Rails. The Plastic Rail End Caps are installed in step 4.9.1. [...]

Flapper Gate Hinges

iradmin — Fri, 23 Oct 2020 22:54:13 +0000

This package includes (2x) Flapper Gate Hinges, enough to replace the Flapper Gate Hinges for 1 whole deck. The Flapper Gate itself is NOT included in this package, neither is the assembly portion which inserts into the Flapper Gate. (2x) Flapper Gate hinges are included in this package, one hinge can work for both left or right side of the Flapper Gate. Flapper Gate Hinges are universal across all decks and all deck sizes. The Flapper Gate is installed in step 4.3. [...]

Replacement Leg Base Plate Assemblies for Tel-Leg (2)

iradmin — Fri, 23 Oct 2020 20:33:49 +0000

The Leg Base Plates sit flat onto, and are drilled into the truck box to secure the truck deck system. This package includes (2x) complete Leg Base plate assemblies. TRUCKBOSS requires a total of (4x) Leg Base Plate Assemblies. It is recommended that those loading UTVs use (6x) Leg Assemblies. The Leg Base Plate Assemblies are installed in step 1.6. [...]

Replacement End Cap for Expandable Sides

iradmin — Fri, 23 Oct 2020 22:12:20 +0000

The Replacement End Caps for Expandable Sides are compatible with only expandable side decks and not with base decks. They are easily distinguished from base deck end caps because all Expandable Side End Caps have LED Lights. The following packages include (1x) End Cap, Corresponding to its position on the deck, as well the relevant LED light plus all the mounting hardware. Please Ensure you are buying the right light as they are not interchangeable. Installation on step 4.7.7. [...]

F Channel (2)

iradmin — Fri, 23 Oct 2020 20:56:00 +0000

The F-channel is slid between the Rail Capture and the bed of the truck to protect the contact point between the Rail Capture and truck bed. This package includes (2x) F-channels. The F-channel is installed in step 1.5.4. [...]

Rail Capture Hold Down Clamps (2)

iradmin — Fri, 23 Oct 2020 20:37:28 +0000

The Rail Capture Hold Down Clamps are used to clamp the Rail Capture to the sides of the truck bed. The F-channel which pairs with it is slid between the Rail Capture and the bed of the truck to protect the contact point between the Rail Capture and truck bed. This package includes (2x) Rail Capture Hold down Clamps. A TRUCKBOSS 6’/7’ requires (6x) clamps in total, while a TRUCKBOSS 8’ will require (8x) clamps. The Rail Capture Hold Down Clamps are installed in step 1.4. [...]